메뉴 건너뛰기

상품명

GLIDEARM V4 (Sold Out!)

상품코드 01
판매가 0
구매수량
원 합계

 

INTRODUCTION

Glidearm which succeeded in kickstarter funding last year, has a camera slider which extends 4 times more; and has Linear sliding and Auto Panning functions.  

The 'Glidearm V4' is improved payload up 2.2lbs to 4lbs and upgraded in various parts.

A feature that a Glidearm v4 user can feel is first that even a slight Clearance does not occur with silky movement, and DSLR+Standard Zoom Lense can be raised to a 5D level because Payload has been Up.


 

 

 

 

detail.jpg

 

FEATURES

 

4x Extention Compact Design

The folding 2-step design allows the slider to be only 2.46”(W) x 9.35”(L) x 4.55(H)” while expanding up to 4 times its size. 
While most camera sliders are marked by the length of the rails, the Glidearm has a total motion of exactly 27.52” from end to end.

 

4xextension.jpg

 

 

compact_withbag.jpg

 

Linear Motion and Auto Panning

Basic camera linear motion is possible. You mount your camera on the outermost mount found at the end of the Glidearm. The camera will always be facing the direction that it was facing when mounted. 
Though you get the similar results as with any other slider, the Glidearm works differently. A soft start and end are possible when used.
This time, you mount the camera on the inner mount. In this case, not only do you get linear motion, the camera is set 3ft’ away from the subject while auto-panning at 135 degrees for 21.1”. 
Though the viewpoint is fixed and can’t be adjusted, the panning is mechanically smooth and automatic. Again, a soft start and end are possible.

 

glide_motion_lin.jpgglide_motion_pan.jpg

 

 

 

 

 

 

Strong And Light Weight

I chose to use a timing belt system for the folding mechanism. This system, which is widely used in the industry, is strong, flexible, and simple. The Glidearm has 3 sets of timing belts which work in conjunction with 5 aluminum pulleys. 
The frame of the Glidearm is an aluminum plate. With a thickness of 3T, it is fastened with 24 aluminum tubes and 54 stainless steel bolts to make a joint. 
The frame plate, joint tubes, and timing belt pulleys are made from hard anodized aluminum, making them much stronger than untreated aluminum. 
The Glidearm was designed using 3D Cad and made with software simulation for 16 various prototypes. After many beta tests, the present design was completed to be optimized and simple. 
As a result of the technical research, the Glidearm has no plastic parts and is solid while weighing in at a little over 2 pounds.

 

strong.jpg

strong2.jpg

 

Top Quality Parts And Hand Made Process 

The Glidearm is made with the highest quality parts, making it durable and reliable. The core component of the Glidearm is the axis module, made with 12bearings and shafts. 
The main pulley was precision manufactured from custom, hand-lathered shafts, A-grade 12steel ball bearings. The timing belt is a Mitsuboshi product made in Japan.
Each parts was carefully chosen to meet strict industrial standards. 
In addition, the logo characters are CNC etched and will never erase.
In the work process of Glidearm, most parts are directly manufactured, refined, and assembled manually, then it is inspected most carefully. 
Precision and smooth movement is only possible through this work.
 

handmade.jpg

 

 

Available Motorized Module (*Optional)

The Invented to Motorized Module Use for only a glidearm, efficient and simple design to easy attachment on the glidearm body.  

The Motorized Module uses a Universal 12v DC Geard Motor. It is connected to an Open Source based Controller so the Advanced Motion Time-lapse function (that is impossible manually) can be used.

 

motorized.jpg

motorized_detail.jpg

 

 

SPECIFICATION

spec.jpg

 

 

 

 

INFORMATION OF A MOTORIZED MODULE KIT

 

The time lapse module, based on open source, turns Glidearm into a professional motion time-lapse equipment.

 

The open source timelapse engine by dynamic perception, verfied by a lot of world timelapsers. (same software in mx2, but redesigning shield )

 

For details on each function, see the next video and follow linked pdf manual.

 

timelapse_info_o.jpg

 

 

                 

                 

 

PRODUCT PACKAGE

 

     CONTENTS OF A GLIDEARM V4 PACKAGE

 

  • Glidearm v4 x 1ea
  • Silicon Bumper x 1ea
  • Mini Ball Head x 1ea
  • 3/8" to 1/4" Down Adapter x 1ea
  • Manual Sheet x 1ea
  • Package Box and Buffer Foam

 

     CONTENTS OF A MOTORIZED MODULE KIT

 

  • Motorized Module x 1ea
  • Timelapse Controller x 1ea
  • Timming Belt x 1ea
  • Pulley x 1ea
  • Camera Shutter Cable for Cannon 5D series x 1ea
  • Extend Shutter Cable x 1ea
  • Stainless Bolt x 5ea(extra 2ea)
  • Package Box and Buffer Foam

v3package.jpg

 

motorizedkit.jpg

pakge_box.jpg

 

 

 

OTHER ISSUES

 

The Glidearm is structured horizontally and designed to be affixed when used. Though it is possible to affix it at various angles, you must understand how to control the friction knob as well as the range of your camera.

 

Because the Glidearm is based on a joint structure, there are limits to using larger cameras. It is the same as extending out your arm and lifting a heavy object. Though you could use a camera that is heavier than the recommended weight, there is a high possibility of shaking due to tension.

 

The Glidearm is structured horizontally and designed to be affixed when used. Though it is possible to affix it at various angles, you must understand how to control the friction knob as well as the range of your camera.

Because the Glidearm is based on a joint structure, there are limits to using larger cameras. It is the same as extending out your arm and lifting a heavy object. Though you could use a camera that is heavier than the recommended weight, there is a high possibility of shaking due to tension.

 

The Glidearm range of movement is not directly proportional with speed. This is due to its unique structure and is shown with the end result of a soft start/end.  

 

Though I believe many will accept this quality as a strong point, I recommend to those who desire for the range and speed to be proportional to either practice controlling the rate of movement or use a slider with a different design.

 

tension.jpg

 

 

THE RELREASE INFORMATION OF A GLIDEARM

*Release 1.0~2.0 is Glideam Kickstarter version.

RELEASE2.xx (Glidearm Pro)

  • Upgraded body frame plate from thickness 3/32” to 1/8”.(enhance bending strength)  
  • Added 8 support pins.(enhance torsional rigidity)  
  • Changed center pulley part from aluminum to high steel.(enhanced shaft fatigue strength)  
  • Redesigned joint bearing module for fix vertical clearance. Added sim ring parts(more smooth move and tight clearance)  
  • The payload up from 2.2lbs to 3.7lbs.

RELEASE3.xx (Glidearm V3)  

  • Changed all bearing to [A] grade bearing(made in japan) and the modificated design axis module for better movement and stability. 
  • Changed anodized lathe machining support aluminum pins and the light weight open type body frame. 
  •  Added a belt tensioner for adjust of the precisely movement. 
  • Changed to easy type fix knob module. 
  •  Changed to detachable silicon rubber bumper.
  •  Available the motorized kit.(advanced motion timelapse controller) 
  • The payload up from 3.7lbs to 4lbs

RELEASE4.xx (Glidearm V4)

  • Redesigned pulley parts and axis module for the high load.
  •  Changed the joint module parts to optimized for high load. 
  •  Changed support pins to high load type. The payload up from 4lbs to 4.5lbs 


 

 

 

  • 등록된 상품평이 없습니다
  • 등록된 상품문의가 없습니다
  1. 글라이드암 제작기간은 일반적으로 주문일 기준 약 5~6 소요됩니다.

  2. 입금확인 후 제작에 들어갑니다. 

  3. 기본적으로 배송은 국내 CJ택배, 해외EMS로 발송됩니다.

  4. 주문완료 후 반품 및 취소는 불가합니다.

  5. 제품의 표면마감과 색상은 사진과 조금씩 차이가 있을 수 있습니다.

  6. 수작업으로 제작 및 검수되는 제품 특성상 표면에 스크레치나 성능과 관계없는 기스 등이 있을 수 있습니다.

  7. 무상 A/S기간은 제품 수령일로부터 60일 이며 정상 작동 환경 아래서 사용시 발생되는 문제에 한합니다.

  8. 무상 A/S기간 내라도 사용자 부주의 파손 등은 유상 A/S 처리 됩니다.

  9. 무상A/S시 접수 택배비는 발송자 부담입니다.

  10. 주문 완료된 품목은 SHOP-구매내역 에서 확인하시기 바랍니다.